A stainless steel version of the Makita miter saw detent plate. This plate has been cnc laser cut, and the gradients have been physically cnc engraved into the plate for maximum accuracy and durability.
Compatability:
This part fits Makita saw models 12" and 10" (the base is the same on both sizes, also the same in the new XGT 10 and 12" models):
NOTE: The accuracy of this plate is relative to the machining accuracy of the saw it is attached to. Testing has revealed that some screw holeson the sawfor the detent plate are not consistent, so some modification to the screw slots on this plate may be required to achieve perfect accuracy.
Write a review for Makita Detent Plate - Stainless Steel - Formerly (STENETENT)
Lawrence R.
Quality product for my Makita LS1219L and it fits perfectly.
I will be painting the plate so the numbers are easier to read.
Michael P.
Great upgrade for my saw, thank you.
Roland M.
Very well-made item, should be much more durable than factory piece.
dylan c.
The fit and finish are excellent, I just see it up in my saw and the detents work precisely, it fit just right on the Makita LS1219
Mark R.
Haven’t fitted it yet but very good service
Michael F.
Excellent quality! And probably the best packing job I have ever seen. Very secure no chance of it bending or getting scratched or nicked. Exact fit! Very legible markings!
Peter c.
Fit perfectly and was easy to install. Definitely makes the stops feel really solid and it looks good.
Scott S.
Mak the saw is back to making square cuts. It would be handy if the numbers were blacked.
Overall, great idea. Works like a champ. Highly recommended to those unfortunates who bought a Mkita miter saw.
Richard E.
Easy installation. Seems true. Looks sharp too. Excited to see how it holds up over time.
Timothy S.
The Stenetent detent plate for Makita LS 1019 is an excellent piece of kit. The CNC markings are precise and the detents are cut perfectly. No more slop! The only slight niggle I have is that the etchings aren’t blackened.
But this is easily taken care of with black paint. Thanks for continuing to make this great item!
Cary C.
Very nice upgrade over the OEM detent plate. Stout stainless steel and more accurate than the stock plate at all detents as well. It would be nice to have it pre-painted, but not a deal breaker whatsoever. I painted mine using 2 coats flat black and 2 coats dead flat clear coat to help with the glare. If you have either the 10" or 12" Makita saw then this is a must have replacement. Shipping, packaging and service were all excellent.
William N.
Love the new plate the one thing I would change is to add some color to the degree numbers on the plate. I’m planning to color them in with permanent marker
John W.
Excellent product received it quicker than expected. Only complaint is the etched markings on the plate are not colored. It would have been nice for it to have color.
Peter H.
The new detente plate corrected the problem. Now I can cut square on the mitre saw. The Other manufactures detente plate did not have the slots in the detente plate machined long enough for adjustment. The manufacturer needs to recheck their machining set up to correct this problem.
A well made detente plate which corrects the manufacturing defect.
Michael D.
This replacement plate is perfect! The oem plate was garbage, it would lift in the 0 degree position by a 1/2 degree either way. Not to mention that aluminum was the worst choice for the original plate. The Packible scale is rigid and precise. I did paint mine black then sand the paint off the surface so I could better see the markings, it was hard to see when not painted.
Donovan H.
Works great. Easy to install, and after re-calibrating, all of the detents read perfectly.
Jared M.
It is a shame that Makita failed in regard to the detent plate. As a professional, the saw became unusable due to the inaccurate cuts. Makita has buried their heads in the sand and acts as if there is no issue. Thank you for making such a top quality replacement. I can now use my saw again. Excellant product!!
Scott H.
Works great Should have changed the original the day I brought it home.
John B.
Great product - definitely an upgrade over the stock plate. Well packaged - no worries of it getting messed up in shipping.
Matthew J.
This item is a must if you have a failed indent plate on a Makita saw - which seems pretty inevitable when you look at the factory aluminum version the saw comes with.
The packaging gave me great confidence that the part did not come to any harm during shipping.
The locking pin fit is so snug at first I thought it was too tight! Instead it turns out to be PERFECTLY designed to fit.
Installation was a breeze on my LS1040 short of a seized bolt on my saw which was unfortunate - it would be have VERY easy otherwise.
With the saw tuned up, the indents are all accurately machined in the correct places and the precision of my work is back where it should be with a saw of this caliber.
I respect this small business for its tenacity to seek support by providing an excellent service and am happy to continue to support them should I have any further needs. A SATISFIED CUSTOMER.
Luke H.
Highest quality, fast shipping and great price. Absolutely will ship here again!
Zachary C.
This Makita stainless detent plate is a perfect replacement for the original. It will last much longer than the aluminum one it replaces!
Danger
A completely precision made item, fixes the problem with the stock part and fits perfectly! Won’t wear out the pin, is more accurate than stock, and the markings won’t wear off!
Over 600 sold world wide with no returns.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
